Engine - GM (19433035)
19433035
OUR LATEST TWIST ON THE BIG-TORQUE 383 STROKER!
When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination, which uses a long, 3.800-inch stroke with 4.000-inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower.
Chevrolet Performance's stroker crate engine is part of our range of Street Performance engines and is designed for optimal performance on the street and the occasional trip down the quarter-mile. It features lightweight aluminum cylinder heads based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower. The result is 435 exhilarating horsepower and 445 lb.-ft. of seat-tugging torque.
Like all of our crate engines, it is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and a high-flow, aluminum intake manifold. Use the Holley 770-cfm four-barrel carburetor, P/N 19170093 to achieve the listed horsepower and torque ratings.
TECH SPECS
Part Number: 19332532 / 19355722
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 383
Bore x Stroke (in): 4.005 x 3.800
Block (P/N 88962516): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12489436): Forged steel
Connecting Rods (P/N 19332460): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Valve Lift (in): .509 intake / .528 exhaust
Camshaft Duration (@.050 in): 222° intake / 230° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36° Total at 4,000 rpm
Maximum Recommended rpm: 6,000
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES
- Requires addition of carburetor, ignition, fuel pump, thermostat housing, thermostat, and starter (not included)
- 435 horsepower rating achieved during GM testing with high-rise single-plane intake manifold (P/N 12496822) and a 770-cfm carburetor with vacuum secondaries (P/N 19170093)
- Chevrolet Performance dual-plane intake manifold (P/N 12366573) may be used to avoid hood clearance problems, but peak power may decrease by approximately 15-20 horsepower
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
OUR LATEST TWIST ON THE BIG-TORQUE 383 STROKER!
When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination, which uses a long, 3.800-inch stroke with 4.000-inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower.
Chevrolet Performance's stroker crate engine is part of our range of Street Performance engines and is designed for optimal performance on the street and the occasional trip down the quarter-mile. It features lightweight aluminum cylinder heads based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower. The result is 435 exhilarating horsepower and 445 lb.-ft. of seat-tugging torque.
Like all of our crate engines, it is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and a high-flow, aluminum intake manifold. Use the Holley 770-cfm four-barrel carburetor, P/N 19170093 to achieve the listed horsepower and torque ratings.
TECH SPECS
Part Number: 19332532 / 19355722
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 383
Bore x Stroke (in): 4.005 x 3.800
Block (P/N 88962516): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12489436): Forged steel
Connecting Rods (P/N 19332460): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Valve Lift (in): .509 intake / .528 exhaust
Camshaft Duration (@.050 in): 222° intake / 230° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36° Total at 4,000 rpm
Maximum Recommended rpm: 6,000
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES
- Requires addition of carburetor, ignition, fuel pump, thermostat housing, thermostat, and starter (not included)
- 435 horsepower rating achieved during GM testing with high-rise single-plane intake manifold (P/N 12496822) and a 770-cfm carburetor with vacuum secondaries (P/N 19170093)
- Chevrolet Performance dual-plane intake manifold (P/N 12366573) may be used to avoid hood clearance problems, but peak power may decrease by approximately 15-20 horsepower
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Shipping Policy
Fast & Reliable Shipping on Genuine GM Parts
When your vehicle is in the garage, every day counts. At PartSpace, we know that whether you are repairing a daily-driver Chevy Silverado or upgrading a Cadillac Escalade, you need your genuine GM parts delivered fast and affordably. We process hundreds of orders daily from our Natrona Heights, PA facility to get you back on the road safely.
Shipping Costs
Standard shipping costs are calculated at checkout based on the weight, dimensions, and destination of your order, using our contracted carrier rates. Your exact shipping charge is shown before you complete payment.
Standard Shipping & Fulfillment Timelines
We work diligently to ensure your Chevrolet parts, GMC parts, and other GM components reach your doorstep as quickly as possible:
- In-Stock Orders: Ship within 24 hours. (Weekend orders are processed the next business day).
- Direct-from-Manufacturer Parts: If a specific Chevy OEM part is not immediately in our local warehouse, we order it directly from GM. These usually arrive to us within 2-3 days and are shipped to you promptly.
- Average Delivery: Most complete orders ship within 2-3 business days. Depending on your U.S. location, ground shipments typically take 2 to 7 transit days.
- Need it Faster? Overnight shipping is available at checkout for an additional cost for urgent repairs like alternators or ignition components.
Shipping Oversized & Heavy-Duty OEM Parts
Upgrading your truck's stance with factory Chevy wheels or replacing heavy suspension components? We've got you covered.
- Oversized or overweight shipments (such as bumpers, engine blocks, or GMC rims) require special freight handling.
- These items will incur an additional shipping cost. Our parts experts will contact you directly for approval prior to shipping.
- Note: We cannot guarantee exact transit times for ground and oversized freight orders.
Additional Shipping Details
- Carrier Substitutions: To provide you with the lowest wholesale prices possible, we may substitute shipping carriers (USPS, FedEx, UPS) at our discretion to reduce your out-of-pocket shipping costs.
- Backorders: In the rare event that a GM part number is placed on backorder or discontinued by the manufacturer, our team will work tirelessly to source it for you as quickly as possible and keep you updated.
- Restrictions: We currently do not ship internationally, and we do not accept COD (Cash on Delivery) orders.
Ready to Order Your Exact Fit OEM Parts?
Don't let shipping delays keep you off the road. Shop our massive inventory of authentic Buick, Cadillac, Chevy, and GMC parts today.
Return Policy
Return Policy
- Contact us to arrange for any return.
- A copy of the invoice must be included with the return.
- A 20% restocking fee applies to all returned parts, unless the return is due to our error (wrong part shipped) or a manufacturer defect.
- Parts must be resalable and in the original packaging.
- We cannot accept used, installed, or test-fitted parts.
- Electrical parts are not returnable.
- We reserve the right to refuse and return any part that has been installed, used, or does not meet the above criteria.
- Return requests must be made within 30 days of receipt.
- The customer is responsible for return shipping costs, except when the return is due to our error or a manufacturer defect.
- Approved refunds are issued to your original payment method within 5–10 business days of our receiving and inspecting the returned part.
Cancellation Policy
- An order, or a portion of an order, may be cancelled any time before it ships and is no longer in our possession.
- If the cancelled part was special-ordered from the manufacturer, a 20% cancellation fee may apply.
Shop authentic GM parts here at gm.partspace.us. Our entire catalog of GM parts and accessories are genuine straight form the original manufacturer. Use our VIN lookup tool to ensure that you have the perfect fit for your vehicle. Orders can be shipped directly to your door!
Shop More Parts Here